SL-55*2-1300 High Speed ABA 3 Layer PE Blowing Plastic Bag Film Extruder
I.Introduction
Factory direct sales PE film extrusion machinery SL50+55-1100ABA is used
to produce three-layers co-extrusion film.
Extrusion system adopts two extruders and one three-layers co-extrusion die to blow
plastic film, the surface and bottom layer share an extruder, we call it A. The production of another extruder is the middle layer of the film, we call it B, so the blown film forms A, B, A three-layers co-extrusion film
II.Main Technical Parameters
Main Technical Parameters
| Model |
SL55+55-1300 ABA Film blowing machine |
| Co-extrusion layer |
Three layers |
| Suitable Material |
HDPE/ LDPE/recycling material |
| Max Film Width |
1200mm |
| Film Thickness |
HDPE:0.01mm-0.1mm |
| Output |
80~120kg/H |
| Total Power |
About 70KW |
| Dimension( L×W×H) |
6800mm×2800mm×6000mm |
| Weight |
About 5500KGS |
| Auto-loader |
Include |
| Filter device |
High Speed Mechanics Screen Changer, |
| Corona treatment |
Include |
| Hot slitter |
One set |
Extrusion &Die &Air-Ring Device
| Screw Diameter |
A 55mm+B 55mm |
| Screw L/D Ratio |
30:1 |
| Screw Barrel Material |
High speed type, 38CrMoAl,surface with nitride, with special mixed segment, screw processing by the double metal |
| Die-Head Diameter |
Φ120mm HDPE Die mould one set ABA type |
| Die head type |
360 degree rotary die |
| Die-Head Material |
45 forge steel,the mould inside andthe die surface were deal with hard chrome and electronic polish treatment, ensure good quality film |
| Big Air-Ring for height 6m |
One set
One set special for blowing HDPE ABA type
|
| Temperature Controlling System |
Digital Intelligent Temperature Controlling System with solid state relay control, Delixi Brand |
| Thermo Control Zone of Barrel |
6 Zones |
| Thermo Control Zone of Take over |
2 Zones |
| Thermo Control Zone of Die |
2 Zones |
| Main Motor Power |
A 22KW+B22KW, Siemens Beide Motor |
| Blower motor Power |
5.5KW |
| Gear Box |
2 pcs Guo Mao Brand High strength hard tooth surface reduction gear box, has a large carrying capacity, low noise, long life, stable transmission, etc |
| Heater |
Ceramic heater complete set for screw and barrel and die head |
Take-Up Device
| Width of Take-Up Roller |
1300mm |
| Take-up Speed |
0-70m/min |
| Take-up traction Motor and inverter Power |
2.2KW |
| Embossing roller |
Include |
Rewind Device
| Rewind Roller Width |
1300mm |
| Max.Rewind Diameter |
Φ500mm |
| Rewind Type |
PLC Control automatic roller change system, double winding with air shaft and with side slitter |
III.Option parts
| No |
Option parts |
| 1 |
Auto loader |
| 2. |
gram control system |
| 3 |
Rotary die |
| 4 |
Auto film width controller |
| 5 |
Air compressor |
| 6 |
Auto voltage regulator |
| 7 |
Manual high speed filter changer |
| 9 |
Corona treatment |
| 10 |
Double rewind |
Audited Supplier 
){kind=link}