| Customization: | Available |
|---|---|
| After-sales Service: | 12 Months |
| Warranty: | 12 Months |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| No. | Component | Qty |
| 1 | Double station (glass fiber cloth/mesh cloth) discharge rack (manual correction, 20kg magnetic powder brake) |
2 Sets |
| 2 | Single station (aluminum foil/fiberglass felt) discharge rack (manual correction, 20kg lightweight magnetic powder brake) |
1 Set |
| 3 | Coating gluing system (see Note 2) | 2 Sets |
| 4 | Aluminum foil (mesh cloth) heating roller ( Φ150×1700mm, temperature 200ºC) | 1 Pc |
| 5 | Bridge roller Mirror roller (Φ120×1750mm) | 1 Pc |
| 6 | Silicone roller (Φ250×1754mm, temperature 350ºC, liquid silicone imported from South Korea) | 1 Pc |
| 7 | Cooling steel roll (Φ175×1750mm, with water-cooled jacket, pneumatic clutch) | 1 Pc |
| 8 | Heat transfer oil heating roller 1 (Φ270×1780mm) | 1 Pc |
| 9 | Heat transfer oil heating roller 2 (Φ400×1780mm, shaft seat with water-cooled jacket, NSK high temperature bearing) | 1 Pc |
| 10 | Heat transfer oil heating roller 3 (Φ500×1780mm) | 1 Pc |
| 11 | Conductive copper ring with carbon brush (80A/80A/30A) | Each 1 Set |
| 12 | Glass fiber distribution flattening tension control system (Φ160×1780mm rubber roller, Taiwan Research new magnetic powder clutch manual controller) |
2 Sets |
| 13 | Aluminum foil (glass fiber felt) flattening tension control system (magnetic powder clutch supporting domestic manual controller) |
2 Sets |
| 14 | Aluminum alloy guide roller (Φ120×1700mm) | 8 Pcs |
| 15 | Steel guide roller (Φ120×1700mm) | 8 Pcs |
| 16 | Main heating roller drive system (4kw motor with frequency converter and reducer) | 1 Set |
| 17 | Glass fiber cloth dewaxing hot roller drive system (2.2kw variable frequency motor supporting frequency converter and reducer) |
1 Set |
| 18 | Auxiliary heating roller drive system (3kw variable frequency motor supporting frequency converter and reducer) |
1 Set |
| 19 | Double station receiving rack (manual correction, 4kw vector variable frequency motor supporting frequency converter) |
2 Sets |
| 20 | Compound hydraulic mechanism (Suzhou Xuzhan Φ63×80mm) | 1 Set |
| 21 | Coiling and pressing device | 2 Sets |
| 22 | Fiberglass cloth inflatable discharge shaft (3 inches) | 2 Pcs |
| 23 | Aluminum foil inflatable discharge shaft (3 ") | 1 Pc |
| 24 | Inflatable receiving shaft (3 inches) | 2 Pcs |
| 25 | Heating roller Heating tube (1800w/ Pc) | 45 Pcs |
| 26 | Punching clutch cylinder (distance, Φ50×150mm) | 2 Pcs |
| 27 | Tension Controller (Jiangsu) | 2 Sets |
| 28 | Man-machine interface (10 inch, MCGS) | 1 Set |
| 29 | PLC Module (Mitsubishi) | Whole Sets |
| 30 | On-line trimming system (HongHua) | 1 Set |
| 31 | Exhaust hood (retractable, HongHua) | 1 Set |
Aluminum foil fiberglass cloth is widely used in many fields such as construction, industry, transportation, energy, home appliances, electronics, and due to its advantages of high temperature resistance, fire resistance, heat insulation, corrosion resistance, and strong reflective performance. With the growing demand for environmental protection and energy saving, its application areas will be further expanded in the future.
Equipment main body seaworthy packaging, accessories wooden box packaging.
If the equipment is not too wide, only need 40-foot open top cabinets. If the equipment is too wide, also need to add flat cabinets.
Jiangyin City Honghua Machinery and Equipment Co., Ltd was established in 1984. Our company is the professional manufacture in the field of soft & paper packaging equipment, with the whole sets of furnishment and techniques in design, manufacture and after sales service. Our company mainly manufacture the Extrusion Coating Machines (Extrusion Laminating Machines), Dry-type Laminating Machine, Film Blowing Machine, Computer Control Automatic Bags Making Machine etc. The factory covers an area of 40,000 square meters with modern processing equipment.
Factory Show
Overseas Exhibitions
Certifications
The following is a product FAQ about the aluminum foil and glass fiber cloth thermal laminating machine:
1. What materials are suitable for this aluminum foil and glass fiber cloth thermal laminating machine?
This aluminum foil and glass fiber cloth thermal laminating machine is suitable for the thermal laminating process of aluminum foil, glass fiber cloth, aluminized film, PET film, non-woven fabric, EPE pearl cotton and other materials. The temperature, pressure and speed can be adjusted according to different thicknesses and materials to ensure the best laminating effect.
2. What is the working principle of aluminum foil and glass fiber cloth thermal laminating machine?
The aluminum foil and glass fiber cloth thermal laminating machine adopts high-temperature heating and high-pressure laminating process. The aluminum foil and glass fiber cloth are evenly heated by the heating roller to soften the hot melt adhesive or bonding layer, and then firmly bonded by the laminating system to form a high-temperature resistant, corrosion-resistant and tensile-resistant composite material.
3. What is the production speed of the aluminum foil and glass fiber cloth thermal laminating machine?
The production speed is usually 10-60 meters/minute (m/min), and the specific speed depends on the material thickness, glue type and process requirements. High-speed models can achieve higher production capacity while maintaining stable laminating quality.
4. Does the aluminum foil and glass fiber cloth thermal laminating machine support automated operation?
Yes, the aluminum foil and glass fiber cloth thermal laminating machine is equipped with PLC intelligent control system + touch screen operation, which can set parameters such as temperature, speed, pressure, etc., realize fully automated production, and has automatic tension control, deviation correction system, automatic edge cutting and other functions to improve production efficiency and product quality.
5. What are the characteristics of the composite aluminum foil fiberglass cloth product?
The composite product has the following excellent properties:
High temperature resistance (can withstand more than 200ºC)
Fire retardant (meet fire rating standards)
High strength tear resistance (improve durability)
Corrosion resistance (suitable for humid and chemical environments)
Thermal insulation (used in construction, industrial insulation, transportation and other fields)
6. What are the maintenance and maintenance requirements of the aluminum foil and glass fiber cloth thermal laminating machine?
In order to ensure the long-term and stable operation of the machine, the following maintenance is recommended:
Regularly clean the heating roller and the pressing roller to prevent the viscose residue from affecting the composite effect.
Check the tension control system and the deviation correction system to ensure stable material delivery.
Lubricate the transmission parts to reduce wear and increase the life of the equipment.
Regularly calibrate the temperature control system to ensure accurate composite temperature.
7. Can the aluminum foil and glass fiber cloth thermal laminating machine be customized according to demand?
Yes, we can provide customized compound machine solutions according to the customer's material specifications, production requirements, and process requirements, such as widening the machine, adding a cooling system, upgrading the automatic cutting function, etc., to meet different production needs.
If you need more detailed technical parameters or other questions, you can always consult!
){kind=link}