Fully Automatic PE Slider Ziplock Bag Making Machine

• Customization: Available
• Lines: 1
• Voltage: 220V
• Model NO.: HGZR-900
• Speed: High
• Continuous-Rolled: No
• Sealing & Cutting: Heat-Sealing Heat-Cutting
• Layer: Single
• Machine Type: Bag Forming Machine
• Computerized: Computerized
• Type: Plastic Bag Making Machine
• Type of Bag: Garment Bag
• Max Bag Length: 85cm
• Max Bag Width: 80cm
• Weight: 2800kgs
• Transport Package: Film Packing
• Specification: 8000*1500*1700mm
• Trademark: HongHua Brand
• Origin: Jiangyin, Jiangsu, China
• HS Code: 84775900
• Production Capacity: 10 Set/ One Mont

Product Description

HGZR-900 Fully Automatic PE Slider Ziplock Bag Making Machine


I. Introduction:
The machine controlled by PLC and servo motors, can produce much kind of zip lock bags with auto slide system.
The is ready for Industrial 4.0 through the IoT accessories. 
,Technical parameter  Material:PE  Thickness:20-80μm  Unwind width:200-900mm  Unwind diameter:Φ600mm  Unwind inner diameter:Φ76mm(≥10mm) Speed of the machine:20-150 /() Max bag width:800mm  Max bag length:850mm  Tolerances:±1mm
The outsize of the machine: 15kw  The outsize of the machine: 8000*1500*1700mm  The machine weight: 2800kg

1. The unwind part: 
   1. EPC Unwind, can adjust the speed 
   2. Auto tape tension 
   3. 5kg brake control the unwind 
   4. The unwind with EPC and lifting by cylinder.  
   5. unwind feeding with Frequency motor adjust the speed 
   6. swing arms for control the smooth tension, controlled with 2 motors 
2. Auto zipper attached system: 
   1. Auto zipper attached system, continue seal 
   2. With water cooling, keep the zip looks perfet 
   3. supersonic for press 
3. Moving parts in middle: 
   1. with the puncher shaft 
   2. Auto slider system, can add the slide automaticly 
   3. can adjust for both moving parts 
   4. ptotocell tracking the mark 
4. Main body part: 
   1. The main motor controlled by servo motor 
   2. Silicon roller under the sealing bar, keep the sealing line well 
   3. Feeding the bags with belt, controlled by Frequency motor  
5. Control part: 
   1. The main machine controlled by PLC and shown by touch screen. 
   2. Heating controlled in touch screen 
   3. Setting the heatting time, punch time and white / printed bags in the PLC. 

II. Main Configurations 

General  Part name	Part name		Type	Qty	Supplier
		PLC		1

 

Control part	Main control			Huichuan
	Touch screen	10.4	1	MCGS
	Photocell	KS-RG22	1	Made in china
main drive part	The       main motor	1.5kw , Servo motor	1	Joint
Pulling part	Pulling motor	1.5kw , 1.5kw Servo motor	2	Joint
Pulling part	motor	0.75kw	1	Made in china
	Frequency		1	Made in china
Unwind part	motor	0.75kw	1	Made in china
	Frequency	0.75kw	1	Made in china
Unwind brake		5kg	2	Hai'an
Air parts			1	Airtac

 

authorized dealership:
EXT-06 KFT. 
 
tel: [phone]
Szekesfehervar, Martirok utja3/B
Hungary, 8000

Our Honors 
 
Our customer from all over the word
 
Machining center 
Shipment